Submit a Quote Request for Clarostat Sensors And Controls Part Number CM45008 with NSN 5905013464074

Part Number: CM45008

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-346-4074

NIIN: 013464074

Item Name : Resistor Variable Wire Wound Non

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

If you have been in search of Resistor Variable Wire Wound Non products that are listed with the NSN 5905013464074 we have you covered here on Speedy NSN. You have reached the RFQ page for part number CM45008 a Clarostat Sensors And Controls item that is readily available for procurement from our website at any time. Whether you wish to purchase this part or simply want to receive more information for your comparisons, be sure to fill out and complete the form provided on this page with as much detail as you can regarding your needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will reach out to you to present a customized quote that keeps your part requirements in mind.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that customers only procure the exact items they are looking for, we list products with as much information as possible. For example, this particular Clarostat Sensors And Controls part was produced under the CAGE Code 12697, ], a unique identifier assigned to manufacturers who have been approved to supply government entities. Additionally, with the NSN 5905-01-346-4074 this product also belongs to the FSC 5905 Resistors. If you ever have any questions regarding our offerings or services, be sure to call or email us at your convenience. Get started on the purchasing process today so we can fulfill all your operational needs as your strategic sourcing partner.

NSN Information for Part Number CM45008 with NSN 5905-01-346-4074, 5905013464074

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-346-4074 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	013464074	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CM45008	5	9	5

Characteristics Data of NSN 5905-01-346-4074, 5905013464074

MRC	Criteria	Characteristic
ABXF	SHAFT LENGTH	0.900 INCHES NOMINAL
AEDZ	SHAFT BEARING TYPE	SLEEVE
AEED	SWITCH VOLTAGE RATING IN VOLTS	115.0
AEFL	MAXIMUM RUNNING TORQUE	15.00 INCH-OUNCES
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AGAV	END ITEM IDENTIFICATION	FCS CREWSTATI
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	295.0 MINIMUM AND 305.0 MAXIMUM
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
ABPM	BODY DIAMETER	1.100 INCHES MINIMUM AND 1.160 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,FLATTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFM	MAXIMUM STOP TORQUE	128.00 INCH-OUNCES
AEFP	NONTURN DEVICE RADIUS	0.530 INCHES NOMINAL
AEGH	SWITCH OPERATING POSITION	END OF ROTATION
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
CQCC	ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION
TTQY	TERMINAL TYPE AND QUANTITY	5 TAB,SOLDER LUG
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABNB	FIRST FLAT LENGTH	0.780 INCHES NOMINAL
ABNC	FLAT HEIGHT	0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
AEEA	SWITCH TYPE	ROTARY
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	255.0 MINIMUM AND 265.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	15.00 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBME	CUBIC MEASURE	1.003 CUBIC INCHES
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ADAP	MOUNTING BUSHING LENGTH	0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.000 INCHES MAXIMUM
CBBL	FEATURES PROVIDED	SWITCH
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	1.000 AC