Submit a Quote Request for General Dynamics Global Imaging Part Number VRW11-4CB60 with NSN 5990008246046

Part Number: VRW11-4CB60

Alternate P/N: VRW114CB60

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-824-6046

NIIN: 008246046

Item Name : Resolver Electrical

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

If you have been in search of Resolver Electrical products that are listed with the NSN 5990008246046 we have you covered here on Speedy NSN. You have reached the RFQ page for part number VRW11-4CB60 a General Dynamics Global Imaging item that is readily available for procurement from our website at any time. Whether you wish to purchase this part or simply want to receive more information for your comparisons, be sure to fill out and complete the form provided on this page with as much detail as you can regarding your needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will reach out to you to present a customized quote that keeps your part requirements in mind.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that customers only procure the exact items they are looking for, we list products with as much information as possible. For example, this particular General Dynamics Global Imaging part was produced under the CAGE Code 10112, ], a unique identifier assigned to manufacturers who have been approved to supply government entities. Additionally, with the NSN 5990-00-824-6046 this product also belongs to the FSC 5990 Synchros and Resolvers. If you ever have any questions regarding our offerings or services, be sure to call or email us at your convenience. Get started on the purchasing process today so we can fulfill all your operational needs as your strategic sourcing partner.

NSN Information for Part Number VRW11-4CB60 with NSN 5990-00-824-6046, 5990008246046

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-824-6046 Item PartTypeName: RESOLVER,ELECTRICAL	5990	008246046	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
577R708H06	2	2	7

Characteristics Data of NSN 5990-00-824-6046, 5990008246046

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.6940 INCHES MINIMUM AND 2.7300 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.7120 INCHES MINIMUM AND 0.7130 INCHES MAXIMUM SINGLE SHAFT
AJSL	BODY SIZE	11
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	160.0 MILLIWATTS NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	314.50 MINIMUM AND 425.50 MAXIMUM
AJTA	ZRS RESISTANCE IN OHMS	516.80 MINIMUM AND 699.20 MAXIMUM
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	15.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	15.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-5.0 TO 5.0
AJWQ	PILOT LENGTH	0.0650 INCHES MAXIMUM
CQTM	TERMINAL LOCATION	REAR
CRGZ	PLUS J ZSO REACTANCE IN OHMS	1260.00 MINIMUM AND 1540.00 MAXIMUM
CRKL	PLUS J ZRS REACTANCE IN OHMS	516.80 MINIMUM AND 699.20 MAXIMUM
CSPK	PLUS J ZCO REACTANCE IN OHMS	1260.00 MINIMUM AND 1540.00 MAXIMUM
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.9800 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0450 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1247 INCHES MINIMUM AND 0.1257 INCHES MAXIMUM SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	22.0 MILLIAMPERES NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	493.00 MINIMUM AND 667.00 MAXIMUM
AJTS	ROTOR DC RESISTANCE IN OHMS	332.00 MINIMUM AND 498.00 MAXIMUM
AJTT	STATOR DC RESISTANCE IN OHMS	180.00 MINIMUM AND 270.00 MAXIMUM
AJTX	COMPENSATION METHOD	WINDING COMPENSATED
AJTY	ZCO RESISTANCE IN OHMS	314.50 MINIMUM AND 425.50 MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	8.000 INPUT TO OUTPUT MINIMUM AND 10.000 INPUT TO OUTPUT MAXIMUM
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	15.0 CENTIMETER-GRAMS NOMINAL
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	7.0 CENTIMETER-GRAMS NOMINAL
AJWR	SHOULDER LENGTH	0.0590 INCHES MINIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.0590 INCHES MINIMUM AND 2.0650 INCHES MAXIMUM
CQXQ	PLUS J ZRO REACTANCE IN OHMS	1467.00 MINIMUM AND 1793.00 MAXIMUM
CQZS	SHAFT SLOT DEPTH	0.0320 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0320 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.985 ROTOR TO STATOR MINIMUM AND 1.015 ROTOR TO STATOR MAXIMUM
CTJK	SHAFT FLATTED PORTION THICKNESS	0.1060 INCHES NOMINAL SINGLE SHAFT
CWFM	SHAFT FLATTED PORTION LENGTH	0.7060 INCHES NOMINAL SINGLE SHAFT
TTQY	TERMINAL TYPE AND QUANTITY	12 SCREW