If you have been in search of Resistor Variable Wire Wound Pre products that are listed with the NSN 5905009781010 we have you covered here on Speedy NSN. You have reached the RFQ page for part number 330-12 a Iv Electronic Klaus Vespermann Kg item that is readily available for procurement from our website at any time. Whether you wish to purchase this part or simply want to receive more information for your comparisons, be sure to fill out and complete the form provided on this page with as much detail as you can regarding your needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will reach out to you to present a customized quote that keeps your part requirements in mind.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure the exact items they are looking for, we list products with as much information as possible. For example, this particular Iv Electronic Klaus Vespermann Kg part was produced under the CAGE Code C7407, ], a unique identifier assigned to manufacturers who have been approved to supply government entities. Additionally, with the NSN 5905-00-978-1010 this product also belongs to the FSC 5905 Resistors. If you ever have any questions regarding our offerings or services, be sure to call or email us at your convenience. Get started on the purchasing process today so we can fulfill all your operational needs as your strategic sourcing partner.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-978-1010 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009781010 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 330-0012 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 2.000 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.438 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.976 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.003 INCHES |
| AEGA | LATERAL RUNOUT | 0.005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.003 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | REAR SHAFT LENGTH 0.481 INCHES MAXIMUM,DIAMETER 0.2497 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 13499-381-1437-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote