Submit a Quote Request for Lockheed Martin Corporation Part Number 3P50004-131 with NSN 5340000754899

Part Number: 3P50004-131

Alternate P/N: 3P50004131

Manufacturer: Lockheed Martin Corporation

NSN: 5340-00-075-4899

NIIN: 000754899

Item Name : Bracket Angle

CAGE Code: 98897

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 00

If you have been in search of Bracket Angle products that are listed with the NSN 5340000754899 we have you covered here on Speedy NSN. You have reached the RFQ page for part number 3P50004-131 a Lockheed Martin Corporation item that is readily available for procurement from our website at any time. Whether you wish to purchase this part or simply want to receive more information for your comparisons, be sure to fill out and complete the form provided on this page with as much detail as you can regarding your needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will reach out to you to present a customized quote that keeps your part requirements in mind.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that customers only procure the exact items they are looking for, we list products with as much information as possible. For example, this particular Lockheed Martin Corporation part was produced under the CAGE Code 98897, ], a unique identifier assigned to manufacturers who have been approved to supply government entities. Additionally, with the NSN 5340-00-075-4899 this product also belongs to the FSC 5340 Hardware Commercial. If you ever have any questions regarding our offerings or services, be sure to call or email us at your convenience. Get started on the purchasing process today so we can fulfill all your operational needs as your strategic sourcing partner.

NSN Information for Part Number 3P50004-131 with NSN 5340-00-075-4899, 5340000754899

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-075-4899 Item PartTypeName: BRACKET,ANGLE	5340	000754899	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
487990	2	2	3

Characteristics Data of NSN 5340-00-075-4899, 5340000754899

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.900 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	1.631 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	W/S: ENGINE,AIRCRAFT,TF-33-P-7 (C-141A/B)
AHLF	SECOND LEG WIDTH	1.300 INCHES NOMINAL
AHLG	SECOND LEG CORNER RADIUS	0.281 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
AHLT	SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	0.857 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.884 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.374 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.160 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.160 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	0.750 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.375 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.375 INCHES NOMINAL
AJFP	FIRST LEG END RADIUS	0.375 INCHES NOMINAL
AJFQ	SECOND LEG END RADIUS	0.380 INCHES NOMINAL
AJZU	FIRST LEG STYLE	END RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
AKBU	SECOND LEG STYLE	CORNER RADIUS
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	THREE HOLES
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	159.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	LEFT HAND
MATT	MATERIAL	STEEL COMP 4130 OR STEEL COMP 8630
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ANGLE